Drone & UAV Division
UAV Electronics & Integrated Engineering
From flight controllers and ESCs to telemetry links and custom payloads, RaSa Dynamics designs, sources and integrates complete drone electronics stacks for industrial, agricultural and research UAV platforms.
UAV Capabilities
Engineering capabilities across the airborne stack
We design and integrate each layer of a UAV's electronics — and engineer them to work together reliably in the field.
Flight Controllers
Autopilot selection, sensor calibration, redundant IMU setups and custom FCB design.
ESCs & Propulsion
BLDC motor and propeller matching, ESC tuning and thrust-bench validation.
Sensors & Navigation
GNSS/RTK positioning, barometers, rangefinders, optical flow and IMU fusion.
Communication Modules
Long-range telemetry, RC links, video downlink and cellular/satellite fallback.
Custom Power Systems
LiPo/Li-ion pack design, smart BMS, power distribution boards and regulators.
Payload Integration
Gimbals, multispectral and thermal cameras, sprayers, release mechanisms and custom sensors.
Ground Control Software
Mission planning, live telemetry dashboards and fleet monitoring tools.
Testing & Compliance
Bench validation, flight test protocols, EMI checks and DGCA-ready documentation.
Platform Experience
Platforms we can build and integrate on
Multirotor
Quad & Hexacopters
Agile inspection and mapping platforms from 250 mm micro frames to heavy-lift 25 kg-class builds with redundant propulsion.
Fixed-Wing
Fixed-Wing & VTOL
Long-endurance airframes for survey and surveillance, plus hybrid VTOL designs combining hover precision with cruise efficiency.
Custom Payloads
Mission-Specific Payloads
Custom payload electronics designed around your mission — multispectral sensing, thermal imaging, dispensing and data logging.
UAV Components
UAV components for engineering and integration
We supply proven drone electronics with integration support — every part bench-checked before it reaches your airframe.
Autopilot
Flight Controller Modules
Dual/triple redundant IMU FCBs with GNSS, telemetry and CAN peripherals supported.
Propulsion
BLDC Motors & ESCs
High-thrust motors from 2204 to 8318 class, matched ESCs with DShot support.
Navigation
GNSS & RTK Modules
Centimetre-level RTK positioning with compass and base-station options.
Data Link
Telemetry & Video Links
Long-range serial telemetry, HDMI-to-IP video links and dual-band RC systems.
Power
LiPo & Li-ion Packs
High-discharge flight packs, smart BMS boards and power distribution modules.
Imaging
Gimbal Cameras
3-axis stabilised EO cameras, thermal cores and multispectral sensors.
Sensing
Altitude & Range Sensors
Lidar altimeters, ultrasonic rangefinders and optical flow modules.
Structure
Frames & Accessories
Carbon-fibre frames, landing gear, propellers and vibration-damping mounts.
UAV Integration Process
From requirements to first flight
A disciplined, test-driven process keeps UAV programmes on schedule — every subsystem is validated on the bench before it ever leaves the ground.
See our engineering services-
01
Requirements & Airframe Sizing
Payload, endurance, range and regulatory constraints defined, then mapped to an airframe and propulsion class.
-
02
Electronics Architecture
Flight controller, power budget, communication links and payload interfaces designed as one coherent stack.
-
03
Bench Integration & Thrust Testing
Wiring harnesses, PDB assembly, ESC calibration and thrust-bench validation of the complete propulsion group.
-
04
Flight Test & Handover
Staged flight tests, tuning, log analysis and documented handover with GCS setup and pilot training.
Building or upgrading a UAV platform?
Tell us about your mission profile, payload and endurance targets. Our UAV team responds to every enquiry within one business day.